Showing posts with label Knitting Gloves. Show all posts
Showing posts with label Knitting Gloves. Show all posts

Monday, February 25, 2013

How to Knit Gloves Part 5


Some Final Tips

  • Use self-patterning sock yarn to add colour and pattern to the glove.
  • Choose hand dyed yarns for colour variation in a simple glove.
  • Work a single lace motif from a stitch dictionary on the back of hand. 









  • Do fancy cuffs in a fashion yarn or in a two colour pattern.
  • Work any simple stitch pattern over the back of hand segment. Choose seed, moss or little cables; pick a stitch pattern that can be easily memorized.
  • Create fingerless gloves by stopping short after beginning the fingers and finishing with a few rows of a non-curling stitch like garter, rib or seed stitch.







  • Look at sock patterns for stitch designs with small repeats which will work on gloves as well.
  • Use gloves to sample stitch patterns from stitch dictionaries. 
  • When using leftover yarn from a garment, use the project as inspiration and repeat an element for a co-coordinating glove. 





Part 1 can be found here.
Part 2 can be found here.
Part 3 can be found here.
Part 4 can be found here.


Monday, February 11, 2013

How to Knit Gloves Part 4



More tips on Knitting gloves

To find the correct spot to pick up stitches on the fingers, look carefully at the knitting, the little V’s are columns of stitches. Pick up in the center of the V’s running up the finger. If the pickup is in the center of an upside down V it is in the wrong location. The next pickup is after two legs of a downward V.

When joining new yarn, leave a long tail, use it to duplicate stitch over any gaps or distorted stitches.

Use the yarn tails to tighten up holes at the base of fingers, by sewing through the purl bumps on the wrong side of the work around the hole.

The chart below gives you rough amounts based on stocking stitch gloves. You can see a larger version by clicking on the chart. 


Estimated Yarn Requirements


Part 1 can be found here.
Part 2 can be found here.
Part 3 can be found here.
Part 5 can be found here.


Monday, February 4, 2013

How to Knit Gloves Part 3





The direction of the increases for the thumb gusset varies from pattern to pattern. The decision to consider is does the work look best with the increases slanting towards the centre of the gusset or away from the gusset? Any stitch pattern may change this result. Neither version is incorrect. What is most important is consistency.

Extra Tips for Fingers


When knitting for yourself check the lengths of each section continuously while knitting and note any adjustments made to ensure the second glove will be the same.



If any of the fingers feel too snug during the knitting, tear back to the beginning of the finger and add in an extra stitch with an additional pickup.

Work the thumb before the fingers for more accurate fit.

If the stitches on waste yarn are slipping down, tug on both ends of the waste yarn above the stitches to be retrieved, until the smaller needle can be inserted.
Use the smaller needles to pick stitches up from the waste yarn and then change to the larger needles.

If the stitches at the base of the fingers look strained, create an additional stitch or two in the pickup area edges and then work corresponding decreases in the first round with knit two together to reduce back to the appropriate number of stitches.

Finger shaping can be perfected by switching to smaller needles just above the upper knuckle for contoured fingers or on the row before the decrease round for fingers of very even widths.

Push completed fingers inside the glove if they get in the way while working subsequent fingers.

Warning, fingertips always look pointy until the yarn tail is woven in.
 
Part 1 can be found here.
Part 2 can be found here.
Part 4 can be found here.
Part 5 can be found here.